Skip to content
Skip to content
Wall Mounting in Stirling with a Twist - 1

17th May, 2021

TV Wall Mounting in Stirling with a Twist

This morning in Adelaide, Mr Antenna tech (aka TV Wall Mount Installer) Tony completed a unusual TV wall mounting task. Wall mounting is a fairly quick task but this one came with a twist. Our customers located in the Adelaide Hills suburb Stirling had been left an eyesore to deal with.

The previous occupants had left behind a rather untidy TV wall bracket. The cabling setup was situated on the wall where our new TV was to be installed. The task began firstly by removing the old TV wall bracket along with the old legacy cabling. This was done to make way for our new 65” TV wall mount.

The hardware used was a Sanus 47-80” inch, rail type bracket. Fixed to the back of the Samsung TV with just two large screws and anchored to the wall with two sturdy bolts, this rail type of wall mounting system allowed the flexibility required for our task.

The new TV was accurately positioned on the wall perfectly square and level but also adjusted to seamlessly conceal any sign of the old bracket, power socket and FTA cabling. To finish up Tony checked the existing Digital Antenna signal for correct signal strength and adequate MER, BER and C/N figures.

Tony also tuned and checked for the correct operation of the customer’s TV. Another extremely happy customer on completion of an expertly installed TV wall mount installation in Adelaide Hills.

Wall Mounting in Stirling with a Twist - 2
Wall Mounting in Stirling with a Twist - 1

Request a Call-Back

Use our call-back service to speak to our friendly Client Care Team. They can discuss the specifics of the service you need. If required, they can also organise an obligation-free site-visit to further assess what needs to be done.

Request a Call-Back

Ready to book? Get an online quote

There’s a new home hero in town.

Quote to install new digital antenna with mount and fit new splitter in the roof space if needed and to install.